You can create or modify scenes from multiple places in the software. We always recommend building scenes on the Scenes tab and then assigning them on the Keypads, Integration, and/or Shows tabs, but you could build them there as well.
To access Design Studio’s scene-building functionality from each tab, consult the images below.
- The Scenes tab
![fig. 75](https://www.ketra.com/hubfs/Knowledge%20Base%20for%20DS%203.0/Commissioning%20an%20Installation/fig.%2075.png)
- The Keypads tab: Click the green Edit button to open the Ketra Scene Builder window
![fig. 76](https://www.ketra.com/hubfs/Knowledge%20Base%20for%20DS%203.0/Commissioning%20an%20Installation/fig.%2076.png)
- The Integration tab: Click the green Edit button to open the Ketra Scene Builder window
![fig. 77](https://www.ketra.com/hubfs/Knowledge%20Base%20for%20DS%203.0/Commissioning%20an%20Installation/fig.%2077.png)
Note: Scenes you create on the Integration tab for analog inputs can be reused on the Integration tab by inputs. However, they will not appear on other tabs.
- The Shows tab: Click the green Edit button to open the Ketra Scene Builder window
![fig. 78](https://www.ketra.com/hubfs/Knowledge%20Base%20for%20DS%203.0/Commissioning%20an%20Installation/fig.%2078.png)
Note: Scenes you create on the Shows tab for time triggers can be reused on the Shows tab by other time triggers. However, they will not appear on other tabs.